How Are Sand Amounts Determined for a Project?
When preparing to complete a construction or landscaping project, it’s important to first acquire all the necessary supplies before beginning your task. Sand is a common building supply used for a variety of applications. While attaining the right type of sand for construction is important, knowing just how much you need for your project is equally essential. Here, Rock Products, Inc. offers advice on gauging the proper amount of construction sand needed for a job so you never get too little or too much again.
Calculating the Volume of Construction Sand Needed
When executing a landscaping, construction, or recreational project that requires an unknown amount of sand, there are simple calculations you can make to get a better understanding of how much of the material you will need. The calculations will vary depending on how you plan to use the construction sand. For example, the necessary amounts will differ if you are filling holes or voids in a landscape, versus topdressing a large area.
Sand Needed For Filling Holes
When measuring how much construction sand is needed for filling in a hole, there are a few variables you will need to determine. You should first verify the square footage of the space that needs filling in. That can be accomplished using the formula:
Length x Width = Square Footage
Next, calculate the cubic feet of the space by multiplying the square footage amount by the depth of the hole, using this formula:
Square Footage x Depth (in feet) = Cubic Footage
Now that you know the cubic footage of the space that needs filling, you can convert that measurement into cubic yards with this formula:
Cubic Footage / 27 = Cubic Yards
Finally, you can determine the number of tons you need by multiplying the space’s cubic yards by 1.35 (a cubic yard is equal to about 1.35 tons of sand).
When you determine the amount of sand you need using these simple equations, you can be accurate with your sand order and get it delivered quickly.
Sand Needed For Topdressing
The amount of sand that’s needed for topdressing a large surface area be calculated using simple math equations. To start, figure out the square footage of the area by multiplying the area’s length by its width. With that information, you can determine how many cubic yards of material are needed to fully cover the surface with this equation:
Square Feet x Depth of Sand Application in Inches x 0.0031 = Cubic Yards of Topdressing Needed for Coverage
Finally, you can determine the number of tons of sand you need by multiplying the cubic yards needed for coverage times 1.35.
Performing these calculations before beginning a project can save you time and money in the long run.
Failing to accurately estimate how much construction sand you need to perform a job can result in purchasing too much. You may end up with excess sand going to waste and paying more than is necessary for materials.
On the contrary, not calculating the amount of sand for your project correctly can lead to purchasing an insufficient amount and having to halt the activity until more construction sand gets delivered.
Acquire Construction Sand and Other Materials at Rock Products, Inc.
Whether you are a landscaper, a general contractor, or a DIY homeowner, knowing the amount of material you need is crucial for any project. Clients who need construction sand or other building materials or supplies should turn to the experts at Rock Products, Inc. Located in West Deptford, New Jersey, we have been providing residents throughout the state with quality products and services since 1995.
Included in our top-of-the-line services, clients can opt to have building materials delivered right to their doors with our freight services. Instead of worrying about how you are going to transport material, you can have it conveniently delivered to your job site. Contact us today at Rock Products, Inc. to learn more about determining the amount of sand needed for a project, or to find an inventory of construction sand in West Deptford, NJ.